Meg Turner

Printmaker and photographer working out of New Orleans, Louisiana. Her practice spans prints, photography, and installation projects that respond to the landscape and the community she is part of.

In addition to her own work and contract printing, Meg serves as the master printer for local photogravure and wet collodion artist Josephine Sacabo. She founded the New Orleans Community Printshop and has since stepped back from a leadership position to focus on her studio practice.

She shoots primarily with a 4×5 Crown Graphic press camera, working in film and wet collodion.

A circular portrait embedded in a dramatic magenta-to-indigo gradient field, with deep black edges framing the composition

What to know before buying a used enlarger in Australia

An enlarger turns a negative into a photographic print, but a used one can hide expensive faults behind a capable-looking head. For photographers moving into darkroom printing, buying secondhand is often the sensible way to afford a quality enlarger. The key is to buy a complete, aligned and safe machine rather than simply the model with the longest specification sheet.

Different enlargers suit very different workflows. A compact 35mm unit may be ideal for one person printing in a spare room, while a larger column model gives more room for medium-format negatives and careful paper handling. Black-and-white work usually places the greatest emphasis on a smooth negative carrier and precise focus; colour printing adds questions about light sources, filters and colour calibration.

Australian buyers have a useful secondhand market to work with. Specialist camera stores, dealers, camera clubs and community printshops in Melbourne, Sydney, Brisbane and other cities regularly handle used enlargers, while private sellers list them through local online marketplaces. The choice on paper is broad, but availability of spare parts and someone who can service the machine varies considerably.

Local conditions also matter. Machines stored in humid Brisbane, salty coastal Sydney or dusty Perth need more care than one kept in a sealed, climate-controlled room, and an imported 230–240V appliance must be checked before it is connected to Australian mains. This guide focuses on the practical inspection, legal and cost questions that should come before you commit to a used enlarger.

Start with the printing you want to make

Begin by listing the formats you actually print and the space available for the machine. A 35mm enlarger with a fixed column can produce excellent work, but a medium-format setup may need a larger baseboard and a sturdier stand. In a small apartment darkroom, footprint and noise can matter more than maximum enlargement size.

The head is the heart of the system. Condenser heads are a common, economical choice for black-and-white enlarging, while diffusion heads spread light more evenly and colour heads add filter drawers for colour work. Check that the lamp, condenser lenses, filter drawer and shutter function correctly, and ask whether replacement parts are available before deciding.

Choose a compatible head and lens

The lens determines the scale and quality of the image, so do not judge the enlarger by the head alone. A common 50mm lens suits 35mm negatives, while 80mm or 100mm lenses suit larger formats. Look for clean glass, no haze or fungus, a smooth focus ring and a lens board that holds the lens firmly without bending it.

Match the negative carrier to the film holder and the easel to your paper size. A carrier that sits at a slight angle, catches light or has a cracked insert can ruin focus before development begins. For wet-collodion work, ask about a purpose-made plate carrier, while 35mm and medium-format film require compatible inserts. Bring a list of your formats, paper brands and preferred print dimensions to the viewing, and confirm whether the seller includes a suitable lens, carriers and an easel rather than a bare enlarger.

Inspect the mechanics before the cosmetics

Look closely at the column, head casting, focus knob, locking screws and focus bellows, if fitted. Run the head up and down its full travel, then set the focus lock at several heights. It should move smoothly without slipping, grind or wobble. A straight column and rigid head are more valuable than bright chrome, while rust, oil residue or a torn bellows can signal a machine that has been stored badly or worked hard.

Focus is the test that matters most. Place a test negative with fine detail in the carrier, raise the head, focus at the baseboard, then change the height and repeat. The image should return to sharp focus without excessive adjustment. Ask to make a test strip if the seller has a darkroom; it reveals uneven illumination, poor alignment and exposure problems that a quick visual inspection can miss.

Check the frame, easel and baseboard

The baseboard should sit flat and remain stable when the enlarger head moves over it. Examine the easel for bent blades, a loose hinge or a surface that has lifted, because any movement changes the distance between negative and paper. Large-format masks can be useful for printing borders, but check that the masking blades are straight and that the paper will sit below the lens without touching the optical path.

Count the parts before negotiating. A useful package may include a lens, negative carriers, a film holder, an easel, a timer and a dedicated lamp or power supply. Missing lens boards or carrier inserts are common in old cabinets and can be expensive to replace. Clean the glass and empty the dust tray, but do not assume a dirty machine is ruined; some marks are harmless while stiff controls or corrosion are not.

Test the electricals and prepare for local conditions

Check the voltage, frequency, plug type and condition of the power cord before switching anything on. Australian mains are 230–240V at 50Hz, domestic sockets commonly use the Australian Type I standard, and older imported equipment may use a different lamp, plug or wiring arrangement. Never bypass an earth or defeat a safety switch. Repairs or alterations to wiring belong with a licensed electrician under the relevant state or territory rules, and many owners also use a residual-current device when testing older equipment.

Under the Australian Consumer Law, a business seller must not mislead buyers and must supply goods of acceptable quality; consumer guarantees can support a repair, replacement or refund. The ACL generally does not govern a genuine one-off private sale, so there you should rely on a written description, photographs and a clear warranty or return agreement. Keep the enlarger in a clean, dry room away from direct sunlight; coastal salt, tropical humidity, inland heat and dust can damage metal, bellows and optics. Let a cold machine acclimatise before powering it up.

Compare prices, sellers and hidden costs

Compare the asking price in Australian dollars with similar enlargers at specialist camera shops, reputable dealers and established online marketplaces, rather than relying on the first result. A dealer may charge more but offer a tested machine, a short guarantee and easier returns. A private seller may offer a better deal, yet you may need to arrange your own collection, testing and servicing. Consumer prices from Australian businesses are normally GST-inclusive, but imported purchases can attract GST, customs charges and carrier fees.

Ask for the model, serial number, clear photographs, a video of the head moving, and close-ups of the lens, lamp, negative carrier and any corrosion. A seller who lets you inspect the whole system is more credible than one who only shows the front. Include replacement bulbs, carriers, a timer, a suitable work surface, delivery and insurance in the total budget; Australia Post and courier insurance can be costly for a heavy, fragile enlarger, so insured shipping should be confirmed rather than assumed.

Make a sound purchase and keep making prints

If possible, test the enlarger with a familiar negative and make a test strip before paying. Check that focus holds, illumination is even and the exposure produces a usable print. After delivery, clean the lenses with the correct optical cloth, keep the lamp and moving parts free of grit, and record the settings that give you repeatable results. A service manual or notes on the previous owner’s modifications can make future repairs much easier.

If you would rather outsource the work, Meg Turner’s New Orleans-based contract printing service can provide a practical alternative for artists and photographers who need film, darkroom or traditional photographic prints handled by a printmaker. Get in touch through the contact details on this site, share your paper, format, image size and timing needs, and request a quote for the job you have in mind.