A practical guide to moving prints safely
Fine art prints can be surprisingly vulnerable in transit. Pressure, vibration, moisture, scraping, and sudden temperature changes may not be obvious immediately, yet they can damage an image before it reaches its first wall. This is especially relevant for works produced through wet collodion, darkroom printing, and traditional printmaking, where surface quality and tonal detail are integral to the work.
An exhibition introduces further complications, including handling by unfamiliar crews, cramped loading areas, stairs, uneven floors, and changing room temperatures. Transporting artwork from a home studio to a gallery in Melbourne, Sydney, Brisbane, Perth, Adelaide, or a regional arts space requires preparation that accounts for both the physical journey and the conditions on arrival.
A dependable art transport plan covers the route, protective materials, travel case, carrier, insurance, and documentation. It also defines who is responsible at each handover. Treating the journey as part of the exhibition process protects the artwork and reduces stress for everyone involved.
Plan the route before packing
Start with the practical details: the number of works, their dimensions, medium, framing, current condition, destination, and expected delivery window. Note whether the venue has a loading dock, lift, freight entrance, or only street access. If stairs or a narrow corridor are involved, measure them and tell the courier beforehand rather than hoping the package will fit.
In Australia, an interstate move may involve several handling points. A print travelling from Melbourne to Sydney can pass through a local depot, a freight hub, and a final delivery vehicle. The same work may be left briefly in a hot loading bay or exposed to rain between vehicles. Independent galleries, artist-run spaces, university collections, and festival venues often use small teams with shared access, so a named contact at every stage is valuable.
Create a written condition record before the work leaves. Photograph both sides of each piece, including the edges, frame, glass or acrylic, and any existing marks. Record damage in plain language and attach the report to the transport documents. The record provides a baseline if an accident occurs and gives the receiving venue something useful for installation planning.
Match the packing to the print and climate
Choose interleaving and wrapping materials according to the medium. Conservation-grade tissue can protect a traditional print or silver gelatin photograph from abrasion and acidic contact. For more sensitive photographic work, consult the paper conservator or printer about archival film, interleaving tissue, and suitable glazing. Materials should be clean, dry, and free from adhesive residue.
Avoid placing bubble wrap directly against an image unless it has been purpose-made for fine art. Its bubbles can concentrate pressure, and plastic can trap condensation. Wrap works with soft non-abrasive material, reinforce the corners, and use rigid dividers so pieces cannot shift. Keep small works in an appropriately sized portfolio or shallow travel case rather than allowing them to move inside a large carton.
Australian conditions deserve particular attention. Summer heat in inland areas can quickly raise the temperature inside a closed vehicle, while Melbourne’s variable humidity and Sydney’s humid summers can encourage mould or warping. Never leave packed artwork in a car, on a verandah, or beside a hot garage wall. Keep cases away from direct sunlight and allow prints to acclimatise before opening them in a cool, air-conditioned venue.
Build a travel case around the artwork
For unframed works on paper, create a flat sandwich with protective interleaving, a rigid inner support, a cushioning layer, and a strong outer shell. Corrugated cardboard alone is rarely enough for a valuable print. A purpose-built travel case or the services of a professional case maker offers greater protection against bending, impact, and repeated handling.
Framed works need separate consideration. Use corner protectors, glazing protection, and a rigid outer frame without placing tape on the image or glazing. Acrylic can be lighter and less prone to shattering than glass, but it still requires protection from abrasion and pressure. For large or irregular formats, add transverse supports so the case does not flex under its own weight.
Label the outside with the carrier’s required orientation and handling information, including “This way up,” “Fragile,” and “Do not clamp.” Keep a duplicate label inside the case and contact details in a separate file. Tamper-evident seals can help document unauthorised opening, although they do not replace insurance or careful handling.
Choose an art transport service and insurance
Small, rigidly packed works may travel through a standard parcel service when the size, weight, destination, and insurance terms are suitable. Australia Post and other couriers provide broad interstate networks, but ordinary parcel coverage may contain exclusions for fine art, framing, breakage, or loss caused by inadequate packing. Read the current conditions rather than relying on a general description of the service.
For valuable, fragile, or oversized work, use a fine art courier or specialist art transporter. Ask whether the quote includes collection, proper packaging, tail-lift equipment, secure loading, and a person who understands works on paper. A carrier used to office furniture or general freight may not offer the same level of care as a white-glove art service.
Insurance should cover the artwork from collection through installation, rather than only while it is in a vehicle. Check that the policy includes loss, theft, accidental damage, and the agreed value, and understand whether frame and glazing are included. A carrier’s liability may be much lower than the replacement value of an original print. For consumer shipments, be familiar with the Australian Consumer Law; for business-to-business freight, the contract and specific liability terms usually determine the relationship.
Inspect, install, and document the handover
On arrival, photograph the closed case before opening it. Compare its seal, corners, and weight with the collection record, then inspect the contents in good light. Note any new dents, tears, moisture, or movement immediately and contact the sender and insurer before separating the packaging. Keep all protective materials until the work has been accepted and installed.
Before hanging, allow the print to adjust to the venue’s temperature and humidity. This is particularly important when moving from a cool vehicle into a warm gallery or vice versa. Check the wall for moisture, fixings, and unevenness, and confirm that the installation will not expose the work to direct sunlight, leaking roofs, or heating vents. Use clean hands or suitable gloves, depending on the surface and venue protocol.
At the end of the exhibition, repeat the condition check before repacking. Record any changes caused by handling, light, humidity, or the installation itself, and obtain confirmation from the borrower or venue representative. This final step closes the transport record and provides useful evidence for future loans, insurance renewals, and conservation reviews.
Use the checks above to prepare a clear transport plan for each exhibition: document the work, choose compatible packing, secure it in a rigid case, select suitable art transport, and inspect it at every handover. Explore Meg Turner’s prints, photography, and installation projects, then contact her to discuss contract printing, exhibition preparation, or a new body of work.