Meg Turner

Printmaker and photographer working out of New Orleans, Louisiana. Her practice spans prints, photography, and installation projects that respond to the landscape and the community she is part of.

In addition to her own work and contract printing, Meg serves as the master printer for local photogravure and wet collodion artist Josephine Sacabo. She founded the New Orleans Community Printshop and has since stepped back from a leadership position to focus on her studio practice.

She shoots primarily with a 4×5 Crown Graphic press camera, working in film and wet collodion.

A circular portrait embedded in a dramatic magenta-to-indigo gradient field, with deep black edges framing the composition

How to Shoot Film in Extreme Humidity: New Orleans Summer Tips

New Orleans summer can make a camera feel as though it has been left in a greenhouse. Air temperature often sits in the low 30s Celsius, while humidity remains high from morning through night. Film, paper, leather, metal and electronics all respond to that moisture, so successful analogue photography depends as much on handling and storage as on exposure.

The same discipline is useful for photographers in Australia. A wet-season walk in Darwin, a humid afternoon in Brisbane or a summer road trip along the Queensland coast can create conditions that are surprisingly close to Louisiana. With a few changes to your routine, you can protect your rolls, reduce condensation and keep shooting without turning every frame into a technical gamble.

Prepare film before leaving the house

Store unexposed film in its original packaging inside a sealed container or double zip-lock bags. If the film has been refrigerated, allow it to reach room temperature while still sealed. Opening a cold canister in humid air lets condensation form directly on the film and inside the cartridge, where it can affect the emulsion and encourage mould.

A small airtight box with fresh silica gel is useful for film that will spend several hours outdoors. Label the packets so you know which rolls are fresh, exposed or awaiting processing. In Australia, where imported colour film can be expensive and specialist black-and-white stocks may need to be ordered from interstate suppliers, a waterproof system also protects a costly part of the shoot.

Avoid keeping film in the glovebox or a parked car. A vehicle can become much hotter than the outdoor temperature, even when the windows are closed. Heat accelerates latent image loss and can damage colour balance, while repeated heating and cooling creates further condensation when the film is moved indoors.

Control the transition between air conditioning and outdoors

Condensation is usually caused by a sudden change in temperature, not humidity alone. When you leave an air-conditioned studio, hotel or car, place the camera in a sealed plastic bag before stepping outside. Keep it enclosed until the body and lens have warmed gradually, usually for 20 to 40 minutes depending on the equipment and the weather.

Use the reverse process when returning indoors. A camera that has been working in New Orleans humidity may carry warm, damp air into a cold room, where moisture settles on the lens, film chamber and internal mechanisms. Leave the camera inside its bag until it has acclimatised, then wipe the exterior with a clean microfibre cloth.

This habit is particularly practical in Australia, where air conditioning is part of everyday life in shopping centres, offices, cinemas and cars. It also helps during humid trips between Darwin’s wet-season streets and heavily cooled interiors, or on a Brisbane summer day when a camera moves repeatedly between a studio and the pavement.

Load and unload film in the driest place available

Film loading should happen indoors, away from direct airflow and visible moisture. Choose a room with air conditioning or a dehumidifier, but let your equipment acclimatise before opening the back. Work efficiently rather than rushing: fumbling with a roll can expose the leader, damage the sprocket holes or leave fingerprints on the film path.

Check the pressure plate, take-up spool and film rails before loading. Humidity can make dust and residue adhere to these surfaces, increasing the chance of scratches. A blower and a lint-free cloth are safer than cotton swabs that may shed fibres. Never use compressed air designed for electronics, as it can push contamination deeper into the camera.

After rewinding, return the exposed roll to its canister or a light-tight bag immediately. Write down the roll number, film stock and exposure details while they are still clear. If you are shooting for a client, keeping a simple log prevents damp conditions from becoming a filing problem later.

Keep lenses, backs and straps dry

A lens hood helps prevent rain, spray and perspiration from reaching the front element. Carry two cloths: one for ordinary dust and another reserved for moisture. If a lens fogs, do not polish it aggressively. Let it clear naturally, then wipe gently once the condensation has disappeared.

Leather straps, canvas bags and foam inserts can retain water long after the camera appears dry. At the end of each day, remove the camera from its bag, open the film compartment only when safe to do so, and allow accessories to air in a shaded room. Do not leave them in direct sun, where rapid heating can warp materials and stress seals.

Inspect rubber light seals and foam regularly. Dampness, heat and age can turn old foam into sticky residue, causing leaks or contaminating the camera interior. A camera that has been used around saltwater, river mist or heavy perspiration deserves extra attention because salt attracts moisture and can corrode metal parts.

Choose film and exposure settings with humidity in mind

Humidity does not automatically change the sensitivity printed on a film box, but it can alter the way you work. Haze reduces contrast in distant scenes, while bright cloud and reflective wet surfaces can fool a meter. Use a lens hood, check highlights carefully and consider a polarising filter when the scene allows it.

Black-and-white film gives you useful flexibility in difficult light. A traditional stock can suit architectural shadows, porches and quiet interiors, while a faster film helps when you want to avoid changing rolls outside. Keep the film canister shaded and minimise the time the camera back is open.

Moisture can make film backings and emulsion surfaces more vulnerable to scratching or sticking. Avoid forcing a roll that feels unusually tight during winding. If the advance lever behaves differently, stop and investigate rather than pushing through resistance. Mechanical cameras are robust, but they are not immune to swollen materials or contamination.

Build a dry kit for field work

A practical humidity kit can be small:

Rechargeable desiccant is convenient, but it must be dried according to the manufacturer’s instructions. Replace saturated packets instead of assuming they are still working. Do not put loose desiccant inside a camera body or in direct contact with film.

A changing bag is especially valuable if a roll jams outdoors. Practise using it at home before a humid shoot, when your hands are dry and the process is easy to repeat. Keep the bag itself clean and completely dry before packing it; a damp changing bag can trap moisture against the film rather than protect it.

For photographers travelling through Australia, remember that some parks, islands and remote areas have strict fire, waste or access rules. Pack out used batteries, packaging and chemical-contaminated materials, and check local requirements before setting up a portable darkroom or processing station.

Process, store and dry prints carefully

Process exposed film as soon as practical, but do not move a cold roll directly into a hot, humid darkroom. Let it acclimatise in its sealed container first. Follow the chemistry manufacturer’s temperature and timing guidance, because high ambient temperatures can push solutions outside their intended working range.

Use a thermometer rather than judging the room by feel. Keep trays, reels and graduates clean, and give negatives plenty of time to dry in a protected area with gentle air movement. Strong fans can deposit dust, while a closed, humid cupboard can leave the film tacky for hours.

Fixer deserves particular care. It contains dissolved silver and should not be poured down a household drain. Australian disposal requirements vary by state and local council, so photographers in Sydney, Melbourne, Brisbane and elsewhere should use a photographic-chemical collection service or follow their council’s hazardous-waste guidance. This is a practical environmental responsibility as well as a legal one.

Traditional darkroom methods remain relevant because they make the relationship between material, climate and image visible. Meg Turner’s printmaking and photography practice offers a useful point of reference for artists interested in film, wet collodion, darkroom work and tactile photographic processes.

Adapt your shooting rhythm to the weather

Plan demanding outdoor work for early morning or late afternoon, when heat is lower and the light is more forgiving. Use midday for interiors, covered streets and shaded subjects. In New Orleans, a sudden storm can arrive after an oppressive morning; in Darwin and northern Queensland, wet-season showers can be just as abrupt, so a weatherproof plan is part of the photographic plan.

Keep the camera under cover during heavy rain, but do not seal a wet body in a bag for the entire day. Once you are in a dry, controlled space, remove surface moisture and give the equipment time to breathe. Record any unusual fogging, shutter stiffness or film-transport problems so you can identify patterns before the next outing.

A slower routine usually produces better negatives in extreme humidity. Protect the film, manage temperature changes, monitor the camera and accept that some locations require patience. The aim is not to eliminate the atmosphere, but to prevent uncontrolled moisture from becoming the dominant mark on every frame.

If you are planning a humid-weather film project, prepare the dry kit, test your storage method and make a short trial roll before committing important work. Explore Meg Turner’s projects and photographic practice for further inspiration, then bring the same care to your own camera, negatives and prints.