Meg Turner

Printmaker and photographer working out of New Orleans, Louisiana. Her practice spans prints, photography, and installation projects that respond to the landscape and the community she is part of.

In addition to her own work and contract printing, Meg serves as the master printer for local photogravure and wet collodion artist Josephine Sacabo. She founded the New Orleans Community Printshop and has since stepped back from a leadership position to focus on her studio practice.

She shoots primarily with a 4×5 Crown Graphic press camera, working in film and wet collodion.

A circular portrait embedded in a dramatic magenta-to-indigo gradient field, with deep black edges framing the composition

A Cleaner Darkroom Starts with Better Habits

A clean darkroom is not a showroom; it is a working system that helps you move confidently from wet prints to dried, protected work. Clear benches, labelled containers, and tools that always return to the same place reduce cross-contamination, damaged film, and wasted chemistry. The reward is not merely a tidy room, but more consistent results and less time spent searching when a print needs to leave before closing time.

Keeping a darkroom organized and clean is easier when every object has a designated home and every session ends with the same short reset. This matters most on busy days, when prints are due, contract work is waiting, and several people share the sink. A system that survives fatigue is more useful than one that depends on perfect motivation.

Australian conditions add another layer. Humid summers in Sydney can slow drying and encourage mould around paper corners, while Melbourne’s cooler, drier winters can leave static and dust more noticeable. Many printers work in converted spare rooms, suburban garages, shared community studios, or former warehouse spaces in inner-city Melbourne and Sydney, where limited floor area makes zoning essential.

Start small: observe the path your hands and feet take during a session, identify what repeatedly drifts out of place, and build the room around that reality. The result should feel calm rather than clinical, with enough freedom to make work and enough structure to reset the space quickly.

Give every zone a fixed home

Divide the room into clear zones for receiving and inspecting work, wet processing, drying, chemical storage, and cleaning. Put only active tools beside the sink, keep clean reels and sleeves away from exposed chemistry, and reserve one shelf for work in progress. Even a narrow garage benefits from zones taped or painted onto the floor, because the eye learns the arrangement faster than a written list.

Give portable items a permanent location rather than letting them accumulate on the nearest available surface. Small lidded boxes work well for clean tongs, clips, thermometers, and spare film; clear-front drawers make it easy to see what is missing. In a shared printshop, label communal supplies and create a hook or tray for personal tools so tidiness does not depend on everyone working in exactly the same way.

Store chemistry safely and visibly

Separate processing chemistry from food, paper, and finished artwork, and keep it in a ventilated, lockable cupboard where children and visitors cannot reach it. Store concentrates in their original labelled containers, record the date opened, and follow a first-in, first-out system. Never use an unlabelled food container for developer or fixer; the shape may look convenient, but the chemistry and the confusion it creates are not worth the saving.

When preparing working solutions, decant only what you need into compatible, clearly marked HDPE bottles or tanks. Write the chemistry, concentration or dilution, and date on the container, and keep the cap closed when it is not in use. Do not top up an old bath with fresh concentrate simply to extend its life, because a sudden change in strength can affect density and contrast.

For contract printers balancing studio work and collaborative facilities, Meg Turner’s background shows the value of a documented, professional workflow. The same discipline belongs at the bench: clean tools, predictable dilution, and an honest waste record make handovers safer for the next person.

Australian disposal rules vary between state environmental authorities and local council wastewater requirements, so no darkroom should assume that a sink is a permitted outlet. In Victoria and NSW, photographic developer and fixer can affect wastewater quality and must not be poured into stormwater. Arrange silver recovery for fixer where practical, and use a council-approved or licensed waste service for spent chemistry. Check the rules for your location before setting a waste routine.

Keep tools and surfaces predictable

Make equipment condition part of the weekly reset. Clean reels, tanks, trays, funnels, and squeegees after use, then dry them completely before storing. Remove residue with the method recommended for the material, and retire cracked tanks, perished rubber seals, or brushes that shed grit. Dust on a reel can reach the film and produce spots that look like processing errors, so a soft brush and a lint-free cloth are worthwhile tools.

Wipe the dry bench and the chemical-safe section of the wet bench regularly, using separate cloths for the two areas. Work from clean to dirty, and never mix household cleaner with processing chemistry. Keep the sink clear while you use it, because a blocked or stained basin encourages temporary piles. Check the safelight, ventilation, and exhaust fan at the same time, since good organisation includes air that keeps the room safe to occupy.

Build a repeatable end-of-session routine

A short closing routine prevents tomorrow’s disorder. Aim to reset the essential areas in fifteen to twenty minutes, with a deeper cleaning on a fixed day each week. The exact sequence matters less than consistency, especially in a busy shared space.

Use a monthly rotation for less frequent jobs, such as cleaning drying lines, checking stored paper, inspecting ventilation filters, and washing removable bench covers. Put supplies back in their labelled positions immediately after use, but tackle larger cleaning tasks on a schedule. A routine that includes both quick resets and occasional deep maintenance will keep minor problems from becoming permanent features of the room.

Turn tidiness into sustainable practice

Make supplies easy to replace before they run out. Australian hardware stores such as Bunnings and Officeworks stock practical tubs, labels, shelving, and protective sheeting, while specialist camera shops can advise on suitable film storage and darkroom accessories. Buying a little extra space for decanting and keeping spare filters, gloves, and trays on hand reduces the temptation to improvise with unsuitable containers.

Treat the maintenance log as part of the artwork’s history, especially when working across multiple projects. Note filtration changes, print dates, chemical batches, and recurring trouble spots. For collaboration, agree on who checks the room before a group session, who handles waste, and which shelf belongs to each installation project. Clear ownership turns cleanliness from a social favour into an operational rule.

Seasonal changes deserve attention too. Check stored paper and film for damp in humid weather, protect the room from direct afternoon sun and heat, and improve airflow before mould or chemical odours become problems. If the space is shared, leave a simple handover note after unusually busy days. Choose one neglected zone to reset this week, put the time in your calendar, and make that first action small enough to finish.