Creating textures in printmaking with collage
Collage brings touch, interruption and surprise to a printed image. A torn edge can soften a hard geometric form, while a translucent scrap can make a dark field appear layered rather than flat. In printmaking, these small shifts give paper a history: each mark suggests something that was handled, moved, covered or revealed.
The process suits an artist working between photography and traditional printmaking. A photographic negative may provide the structure, while chine-collé, monotype, relief printing or hand-applied paper introduces an irregular surface. The resulting work can feel both precise and physical, with texture carrying as much meaning as the image itself.
For Australian artists, collage also offers a practical way to work with locally available materials. Old maps, discarded packaging, cotton rag offcuts and papers collected from artist-run spaces in Sydney, Melbourne or Brisbane can become part of an edition. Even the changing light and dry air of inland studios can influence how paper absorbs ink and adhesive.
Meg Turner’s practice, grounded in film, wet collodion, darkroom processes, installations and printmaking, provides a useful context for considering this approach. Her portfolio connects image-making with material decisions, contract printing and shared workshop knowledge, showing how texture can develop through both careful technique and open experimentation.
Start with the surface
Texture begins before the press is prepared. Smooth Japanese tissue creates a quiet veil, while handmade paper with visible fibres can interrupt a clean inked shape. Corrugated card, lace, muslin, envelopes and thin bark-like papers can all produce a different visual rhythm, although each must be tested for thickness, absorbency and stability.
Collect materials with the final print in mind. A glossy magazine page may resist ink or adhesive, whereas uncoated paper usually accepts both more readily. In Australia, packaging from local markets, paper bags from a Melbourne studio supply shop or remnants from a community printroom can provide useful surfaces without requiring expensive specialist stock.
Make a sample sheet before committing to an edition. Print small swatches over each material, record the ink colour and pressure, and note whether the paper curls or changes tone. This modest archive becomes particularly valuable in humid coastal places such as Sydney or Cairns, where drying times can differ considerably from those in a cool, dry Adelaide workshop.
Build layers with chine-collé
Chine-collé is one of the clearest ways to combine collage with printmaking. A lightweight piece of coloured or patterned paper is positioned on the plate or block, coated with adhesive, and transferred to the support sheet during printing. Ink can then sit across the inserted paper, making it feel integrated rather than pasted on afterwards.
The technique works well for creating areas of controlled contrast. A pale fragment beneath a dark intaglio line can make the mark appear sharper; a muted ochre or blue piece can shift the emotional temperature of a monochrome image. Torn fragments often look more natural than precisely cut shapes because their edges catch ink unevenly and allow the base paper to remain visible.
Registration deserves patience. Use a transparent guide or a printed template to establish where each fragment will sit, especially when working with repeated editions. Slight variations are part of the appeal, yet excessive movement can weaken the composition and make the collage appear accidental rather than deliberately unstable.
Use torn edges and found marks
Torn paper creates a different kind of texture from embossed or heavily inked surfaces. Its ragged edge catches light and casts a fine shadow, giving the print a shallow relief. Place a fragment over a broad area of flat colour and the boundary will become an expressive mark in its own right.
Found materials can carry associations without becoming literal illustrations. A piece of an old envelope may suggest correspondence, while a torn street map can evoke movement through a city. For an Australian audience, fragments from a discarded tram timetable, a regional road atlas or a paper shopping bag from a weekend market can bring a local register to an otherwise abstract print.
Try varying the direction of fibres and tears. A vertical strip can reinforce a figure or architectural form, while a horizontal fragment may settle a restless composition. Leave some edges unglued during early testing so you can see how shadows, lifted corners and overlapping layers alter the image before making the final attachment.
Combine collage with photographic processes
Collage can be paired with photographic printmaking to make an image feel less fixed. A cyanotype, photopolymer plate or darkroom-derived image can provide a tonal foundation, while overprinted paper fragments disrupt the photographic realism. This tension between recorded detail and handmade interruption is especially effective when the image contains traces of place, memory or weather.
Wet collodion offers another route into layered surfaces. Its glass-like tonal qualities can be echoed by translucent tissue, mica-like paper or thin vellum. When preparing the chemistry, artists should work safely and follow a reliable process; Meg Turner’s guide to mixing your own collodion offers a relevant reference for those exploring the medium.
A useful method is to print the photographic image first, let it cure fully, then add a restrained collage layer. Avoid covering every significant detail. Texture gains strength when it frames a subject, interrupts a shadow or leaves a narrow opening through which the original image remains legible.
Choose adhesives and inks carefully
The adhesive is part of the artwork’s long-term behaviour. Wheat paste can be appropriate for some papers, while archival PVA or specialist printmaking adhesive may suit heavier fragments. Test for staining, shine and flexibility, and remember that a glue that appears clear when wet can dry with a visible film.
Ink thickness also affects the relationship between image and collage. A dense oil-based ink may overwhelm a delicate tissue layer, whereas a transparent colour can allow the fibres underneath to remain active. Water-based inks dry quickly, which can help in a busy shared studio, but their shorter working time may require faster and more consistent handling.
Australian conditions make conservation testing worthwhile. Heat in a western Sydney studio or dampness near the Queensland coast can cause paper to expand, contract or cockle. Store works flat with suitable interleaving, keep finished prints away from direct sun, and allow enough drying time before stacking or framing.
Make texture serve the composition
Texture should have a role beyond decoration. Repeated fragments can establish rhythm, while one dense collage area can create visual weight and direct attention. Compare a print from across the room and at close range: from a distance, the texture should support the overall structure; nearby, it should reward careful looking.
Consider contrast in several forms. Rough against smooth, opaque against transparent, warm against cool and torn against sharply cut can each produce a different kind of energy. A limited palette often makes these changes more noticeable, particularly when the underlying image already contains complex photographic information.
Editioning requires a balance between consistency and variation. Record the placement of fragments, pressure settings and drying conditions, but allow small differences where the process naturally shifts. In a community printshop, this openness can become part of the shared character of the work, with each impression retaining evidence of its making.
Present and document layered prints
The physical edge of a collage print matters when it is exhibited. Float mounting can reveal deckled paper and shallow relief, while a window mount may create a more contained, graphic presentation. Choose framing that does not press fragile fragments against glazing, and consider how raking light will reveal raised edges without causing harmful exposure.
Documentation should include close views as well as a straightforward full image. Detail photographs can show fibres, overlaps and translucent passages that disappear online. This is valuable for collectors browsing from Perth or Canberra, where an artwork may be purchased before it is seen in person, and for curators assessing how a piece will operate in a gallery.
A strong portfolio can also explain the material sequence without over-directing interpretation. Mention the papers, processes and sources of inspiration, then let the surface remain open to discovery. Whether the work is shown in a New Orleans exhibition, an Australian print fair or a small artist-run space, tactile evidence gives viewers a reason to slow down.
Experiment with a small plate, a few gathered papers and an image that can tolerate change. Test each layer, keep notes, and let torn edges, stains and shifts in registration become active parts of the visual language. Explore Meg Turner’s printmaking, photography and installation projects for further insight into process-led work, and contact her studio about contract printing or collaborative production when a project calls for experienced technical support.